Chris J. Cieszewski:
All Cells must be subject to this colunm!

Chris J. Cieszewski:
This is an example of the html programming for the first three lines of section A.

Chris J. Cieszewski:
1. This entry should be subject to year, so you need to edit the "Ignore" and "year" variables.

2. Add the offset dependency to have more than one record displayed and the year dependency.

3. Add the other cathegories (i.e., Service, Administrative, and Teaching).

[4]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[5]

Chris J. Cieszewski:
Use this column and defined in it relations to test if there are any entries in each cathegory. Then use the sum to make conditional print of the table headins versus the ****No activity …**** note using the =+if(Blank<1,"**** No activities...****","the other statement").

[6]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[7]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[8]

[9]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[10]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[11]

[12]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[13]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[14]

[15]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[16]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[17]

[18]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[19]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[20]

[21]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[22]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[23]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[24]

[25]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[26]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[27]

[28]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[29]

[30]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[31]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[32]

[33]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[34]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[35]

[36]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[37]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[38]

[39]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[40]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[41]

[42]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[43]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[44]

[45]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[46]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[47]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[48]

[49]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[50]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[51]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[52]

[53]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[54]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[55]

[56]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[57]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[58]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[59]

[60]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[61]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[62]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[63]

[64]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[65]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[66]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[67]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[68]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[69]

[70]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[71]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[72]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[73]

[74]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[75]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[76]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[77]

[78]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[79]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[80]

[81]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[82]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[83]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[84]

[85]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[86]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[87]

[88]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[89]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[90]

[91]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[92]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[93]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[94]

[95]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[96]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[97]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[98]

[99]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[100]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[101]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[102]

[103]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[104]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[105]

[106]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[107]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[108]

[109]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[110]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[111]

[112]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[113]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[114]

[115]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[116]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[117]

[118]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[119]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[120]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[121]

[122]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[123]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[124]

[125]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[126]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[127]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[128]

[129]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[130]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[131]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[132]

[133]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[134]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[135]

[136]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[137]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[138]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[139]

[140]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[141]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[142]

[143]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[144]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[145]

[146]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[147]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[148]

[149]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[150]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[151]

[152]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[153]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[154]

[155]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[156]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[157]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[158]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[159]

[160]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[161]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[162]

sifrgis:

[163]

[164]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[165]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[166]

[167]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[168]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[169]

[170]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[171]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[172]

[173]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[174]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[175]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[176]

[177]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[178]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[179]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[180]

[181]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[182]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[183]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[184]

[185]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[186]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[187]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[188]

[189]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[190]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[191]

Chris J. Cieszewski:
Note that this program starts with closing of the table from the previous section. Then it generates the first two lines of the report headings B. and B.1.

[192]

[193]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[194]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[195]

[196]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[197]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[198]

[199]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[200]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[201]

[202]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[203]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.

[204]

[205]

Chris J. Cieszewski:
This is the statement that there are no data and the data table heading in a single if statement.

[206]

Chris J. Cieszewski:
Example of how this column should be programmed using both dates and comment variables.